A common IC counterbalance forklift. Mast chains and forks are safety items; the transmission and engine carry the cost.
The Hyster H50FT is a typical internal-combustion counterbalance forklift used in yards and warehouses. Mast chains and forks are the safety items, while the transmission and engine are the larger costs.
Stretched chains and worn forks are safety and capacity issues.
CHECK Measure chain stretch and fork heel wear against limits.
Cylinder leaks cause the mast to drift or tilt to creep.
CHECK Raise a load and check for drift; inspect cylinders.
Powershift and converter wear is a major cost.
CHECK Road test for slip and harsh engagement.
Engine condition follows maintenance.
CHECK Check cooling, blowby, and run quality.
Brakes and tires wear with use.
CHECK Test braking and inspect tire wear.
Load chain wear / elongation gauge · Fork caliper and fork wear gauge · Hydraulic pressure gauge · Digital multimeter · Battery hydrometer and load tester · LPG leak detector · OEM diagnostic tool where applicable · Tape measure and calipers …
See the full Forklift & Material Handling Inspection tool kit →
Pre-tagged for the Hyster H50FT Forklift (All series).