LeeBoy 8616 Asphalt Paver
Inspection Guide
A staple commercial paver where the screed and conveyor/auger system make or break mat quality. Heat and wear plates are the tells.
The LeeBoy 8616 is one of the most common asphalt pavers on US commercial jobs. Paving quality lives in the screed and the conveyor/auger system, so the inspection focuses on screed heat and wear, material feed, and the grade controls.
Worn screed plates, dead heat zones, or a failing tamper ruin the mat.
CHECK Verify screed heat across all zones, test vibration/tamper, and inspect wear plates.
Worn conveyors and augers feed material unevenly.
CHECK Run the conveyors and augers and inspect for wear and proper flow control.
The propel and truck-push system wears.
CHECK Inspect tracks or tires and the push rollers.
Automated grade controls affect mat quality.
CHECK Test the grade and slope control systems.
Hopper, hydraulics, and engine condition follow use.
CHECK Check the hopper, hydraulics, and engine.
- Verify screed heat across all zones
- Inspect screed wear plates and tamper
- Run conveyors and augers
- Test grade and slope controls
- Inspect tracks, hopper, and engine
Infrared thermometer / thermal camera, Hydraulic pressure test gauge, Digital multimeter, Tape measure and calipers, Inspection light and mirror, Camera for documentation …
See the full Compaction & Paving Inspection tool kit
Request a LeeBoy 8616 Asphalt Paver inspection
Pre-tagged for the LeeBoy 8616 Asphalt Paver (All series).